Store Entry Alert Features

The ERA-PIR-SPK delivers precise entrance monitoring with its built-in speaker. Mount above any doorway for instant alerts when customers enter, with adjustable coverage to prevent unwanted triggers from general foot traffic.

ERA-PIR-Mounted-Over-Doorway — ERA PIR Mounted Over the Doorway

A typical installation is to mount the sensor over a door using the included mounting bracket. What makes this unit stand out over other sensors is the design of the mounting bracket. Most PIR sensor mount on a pivot ball and do not allow you to aim the sensor’s emitted beam inwards toward the floor. Although this might work well when you want to cover a general area, many business owners and managers want to use this product for a specific purpose, often to detect movement through a doorway. By mounting this sensor on the bracket and rotating the sensor’s lens up and down, you can “aim” the beam straight down and not bleed into other areas.

For example, if you have a convenience store, you probably want to detect when someone enters through a doorway but do not want to catch general foot traffic through your store–that might not be very pleasant.

When triggered, the sensor will emit sound from a speaker built into the unit. It does not transmit the signal to a remote location like the sister product, the ERA-PRDCR. Ideal for areas up to 3,000 ft., the gentle tone sounds with volume control is enough to notify but not alarming. If you need something louder, please refer to the above product, the ERA-PRDCR.

Entry Chime System Benefits

Customize your alerts:

Four Volume Levels: Up to 90dB
Three Alert Tones: Including classic ding-dong
Battery Efficient: 18-month life at 50 triggers daily
Quick Reset: 5-second activation delay
Low Battery Alert: Unique warning tone

Retail Door Monitor Applications

Perfect for various settings:

Convenience Stores: Entrance alerts
Small Shops: Customer notification
Office Doors: Visitor monitoring
Service Areas: Staff alerts
Side Entrances: Secondary access monitoring

Technical Specifications

Coverage by Mount Height:

8′ Height: 9.20′ Wide x 0.60′ Deep
10′ Height: 11.5′ Wide x 0.75′ Deep
13′ Height: 14.95′ Wide x 0.98′ Deep
16′ Height: 18.40′ Wide x 1.20′ Deep

System Features:

Power: 9V alkaline battery
Volume: 90dB maximum
Detection: Passive infrared
Reset Time: 5 seconds
Warranty: 1-year coverage

Package Contents

1 x ERA-PIR-SPK sensor
1 x Adjustable mounting bracket
Mounting hardware
User manual

Mounting Options

The ERA-PIR-SPK features a unique mounting bracket allowing precise beam adjustment. Position the sensor to monitor exactly where you need coverage without detecting unwanted areas.

*Notes on mounting the unit:

The higher the unit is mounted, the larger the monitored zone becomes. For example, mounted at 8 feet off the ground, the sensor will emit an area approximately 9.2′ wide x 0.6′ depth. At 16′ mounting height, the zone is increased to 18.4′ w x 1.20′ d. The unit was engineered to create a narrow depth as most customers are business users who will use this product in a convenience store or store. The small depth of the zone helps to eliminate unwanted triggers by foot traffic near the monitored door.

ERA-PIR-Monitored-Zone-Size — **Changes to mounting height changes the size of the monitored zone**

Easy Installation

Install 9V battery
Mount bracket at desired height
Adjust sensor angle for coverage
Select preferred tone and volume

Stand Alone Product

Motion Sensor with Sound: ERA-PIR-SPK